Briefly, the ‘Current Pending Sector Count’ warning indicates imminent drive failure and requires urgent backup và recovery followed by hard drive or SSD replacement.

Bạn đang xem: Lỗi current pending sector count

WARNING: Immediately stop using or minimize use of your affected hard drive. Never perform hit và trial methods on a failing drive as it may further damage the storage drive and lead to early failure. Carefully follow the detailed steps in the post to fix the current pending sector count warning without much data loss.

Current Pending Sector Count is a critical S.M.A.R.T. Parameter. The parameter indicates the number of unstable sectors on a hard drive or SSD that are yet khổng lồ be remapped or reallocated.

If you check the Current Pending Sector Count SMART parameter of your drive, you will notice a raw value of this attribute. The value indicates the number of sectors waiting to lớn be remapped (reallocated). These sectors are basically damaged storage blocks — bad sectors — on the drive.

NOTE: Bad sectors or bad blocks (also known as reallocated sectors) are damaged sectors that don’t respond khổng lồ any read/write request. Hence, data can’t be stored (written) or fetched (read) from those sectors. These sectors are marked bad & are re-allocated to spare sectors on the drive — available in most modern drives.

Caution: file fragments stored in a bad sector become unreadable, which leads to data corruption, file system damage, and disk errors.

When the bad sectors are remapped, the value of the reallocated sector count also increases. But when there aren’t many spare sectors left on the drive for remapping (reallocation), you see an increase in Current Pending Sector Count attribute value & a warning.

As the number of sectors pending for remapping increases, the chances of drive corruption và failure also climb up significantly. The drive may turn RAW or fail anytime if timely & appropriate actions are not taken — causing an irreversible data disaster.

How to fix or Lower Current Pending Sector Count Warning

A few fixes may help you repair or at least lower the ‘Current Pending Sector Count’ warning. These fixes include zeroing or secure erasing the affected storage drive & running CHKDSK scan.

Thus, before you apply these fixes, it is important that you backup files from the affected drive.

Steps to lớn Securely Backup and Restore Data from Failing Drive

If you are able to access the drive data, simply copy và paste your important files from the impending drive lớn a different storage media. Then kiểm tra the copied files for the integrity, i.e. If you are able to xuất hiện and access the copied files.

The step is important since there are chances that not all traces or fragments of files are copied due lớn the SMART error — leading to file corruption.

And as mentioned earlier, bad sectors can also damage file system which turns a drive into RAW format.

In such cases, follow the instructions given below khổng lồ clone the dying hard drive or SSD and then recover inaccessible files safely from a failing (or RAW) drive.

Click ‘Monitor Drive’Click ‘Clone Disk’Now select the Source Disk — the affected hard drive và then the Target Disk — a new hard drive or SSD of same or larger size than the Source Disk connected via USB enclosure or SATA connector




Figure 6: Disk 1 is cloned Hard Drive connected via USB 3.0 Port (Enclosed in an HDD Enclosure)

Now that you have cloned your impending drive, close the ‘Drive Monitor’ utility. This will take you khổng lồ the main screen of Stellar Data Recovery Premium.

Click ‘Recover Data’ and then follow the software on screen instructions lớn run data recovery on the failing drive to get back your inaccessible files from a failing or RAW drive volume.

Xem thêm: Ghép Mây Vào Ảnh Bằng Photoshop, Cách Ghép Ảnh Bằng Photoshop Trên Máy Tính

The software natively recognizes a RAW (corrupt) drive volume and facilitates data recovery with its ‘Deep Scan’ option that scans và recovers files based on file-signatures. The scan thoroughly digs each drive sector và recovers every trace of lost data.

IMPORTANT TIP: You may also run data recovery on your cloned drive khổng lồ get back lost files. Cloned drive is a sector-by-sector copy of your failing drive and contains both existing & lost data.

Once you have recovered required files, go ahead, and follow the fixes given below khổng lồ get rid of ‘Current Pending Sector Count’ Warning.

Steps to Fix the Current Pending Sector Count Warning


CHKDSK is a command line based disk error-checking tool that can help you fix the Current Pending Sector Count warning. The job of the CHKDSK scan is lớn inspect all the sectors on the drive for the read/write operations. If some sectors don’t respond lớn the requests made by the scan, the CHKDSK tool marks them as bad sectors and reallocates them with spare memory blocks. Thus, the CHKDSK scan can probably lower the Current Pending Sector Count attribute value.

Run following CHKDSK command on the disk affected by the SMART error:

1. Open Command Prompt window with administrator access

2. Then type the following command followed by the ‘Enter’ keypress

chkdsk /r /f X:

Where X is the impending drive volume letter. If your drive contains multiple volumes, run the CHKDSK scan on each volume — one at a time.


3. After the scan, open the Stellar Data Recovery Premium Software, click ‘Monitor Drive’, and then click ‘SMART Status’ to kiểm tra the Current Pending Sector Count value và if the warning has disappeared or not.

Full Format or Secure Erase Drive

Sometimes, the drive may misread the information on sector count. However, you can force the drive into re-reading the pending sector count value by a secure erase method.

When you secure-erase your drive with tools such as BitRaser for File. The software overwrites each storage block on the drive with some random data forcefully. It also tries lớn overwrite memory blocks (or sectors) that the drive (or the system) assumes as bad.

With the secure eraser tool, you can either erase entire drive along with the data in it or simply choose lớn wipe only the empty storage space on the drive.

Erasing the free space on the drive may fix the issue, and that’s the safest method lớn get started as it doesn’t delete your data from the drive. However, it’s also recommended that you clone your impending drive or at least backup all the files — if haven’t already — before running secure erase.

Read this instructional guide to secure erase a drive & force drive to recount the Current Pending Sector Count & recalculate other SMART parameters as well.

Step 5: RMA Drive

If your hard drive, SSD, PC, or máy tính xách tay is still under warranty, get the dying và defective drive replaced. Although the manufacturer isn’t responsible for your data loss or recovery, they will surely approve the Return Merchandise Authorization (RMA) & provide you with a brand new hard drive or SSD.

So backup (clone) drive & recover inaccessible data. Once you have all the data, replace the storage truyền thông and try to fix the Current Pending Sector Count Warning.


Active monitoring of disk SMART parameters is much required to avoid the inevitable data loss situations due khổng lồ degrading drive. The SMART disk attributes such as ‘Current Pending Sector Count’ & ‘Reallocated Sector Count’ warnings indicate imminent drive failure và should be handled immediately.

Start with backing up your important files. You may vày this manually or use an automatic disk cloning utility such as Drive Monitor.

Cloning not only backups your entire drive data but also saves you from re-installing the Windows, software’s, và reconfiguring the system.